In this review we feature the best waterproof ATV speakers that you can install on your ATV vehicle that provides really good sound performance and waterproof resistance. These ATV speakers are equipped with high-performance acoustic drivers to deliver optimal sound quality in outdoor open spaces and under the loud engine noise of your ATV. They produce full-range sound quality together with deep bass and allow you to enjoy your favorite music soundtracks while riding on the ATV. They also come with weatherproof construction which is resistant to rain and exposure to water. If you are looking for waterproof ATV speakers to install in your ATV, be sure to check out our top picks below!
#1 Best Overall: BOSS Audio MRWT40 Waterproof ATV Speakers
The BOSS Audio MRWT40 are some of the best waterproof ATV speakers available that come as a pair of 400 watt, 4 inch full-range 2-way speakers with a marine grade construction for durability. These speakers come with full marine grade construction with water-resistance and UV production for ATV power-sports. Each speaker comes with a 4” polypropylene cone and a 1” silk tweeter for crisp highs and crisp audio reproduction. It also features a 1” aluminium voice coil with rubber surrounds in a plastic basket. These ATV speakers come with aluminium clamp which fits the bars from 1.5” to 2” and work well with ATVs and UTV cages. These ATV speakers have an impedance of 4 ohms with a frequency response of 130 Hz to 20 kHz and a sensitivity of 94 dB. They come with dimensions of 7” depth, 5” wide, and 7” high with a weight of 5.9 lbs per pair. If you are looking for the best waterproof ATV speakers that can deliver superb audio and last a long time under outdoor weather conditions, the BOSS Audio MRWT40 speakers are the ones to get.
The sound performance of the BOSS Audio MRWT40 surpassed our expectations. These speakers pump out some serious volume and good quality sound when connected with a decent amplifier – that can produce a whopping 400 watts of power per pair. They can produce so much volume that they can literally make your entire ATV shake when cranked up to maximum volume – without any distortion. The sound performance that you get with the MRWT40 speakers has plenty of depth and substance – the midranges sound full and solid, while the bass output hits hard and performs above expectations for a setup without a dedicated subwoofer. These ATV speakers come with a 4” polypropylene cone which delivers deep lows and great sound reproduction. Vocal performances sound really crisp and detailed, while rock and electronic dance music felt punchy and smooth. We did not hear any harshness from these speakers and they can really blast out music even in outdoor open spaces. They make driving in the ATV really fun while reproducing your favorite tunes and soundtracks.
The MRWT40 are specially built ATV speakers with water-resistance – all the major components such as the surround and spider have been coated and sealed for protection. The outside shell of the ATV speaker has an ultra-violet coating to protect it from sunlight and maintain durability. These make the MRWT40 weatherproof speakers that can resist the outdoor elements – although we would not recommend direct exposure for prolonged periods of time. The MRWT40 comes with mylar dome tweeters which produces sweet midranges and has a higher durability which does not rust easily. It also comes with butyl rubber surrounds that connect the cone to the basket for added durability. The cones on the speakers are poly-injected for greater durability and flexibility. These ATV speakers feature a quick fit terminal design and are relatively easy to install – they have rather compact dimensions which make them easy to fit on ATV cages. These speakers will require a dedicated amplifier with a recommended power setting of 200 RMS per channel and they have a peak power of 400 watts. The entire package comes as a pair of MRWT40 ATV speakers.
The Verdict? The MRWT40s are some of the best waterproof ATV speakers we have tested that deliver superb sound performance. They have an RMS power of 200 watts and a peak power of 400 watts which means that they can produce plenty of volume for ATV use and project sound in outdoor open spaces. It comes with an all-terrain and fully marine-grade speaker design for added protection against outdoor elements. These speakers are equipped with really good specifications including a 4” polypropylene cone, 1” silk dome tweeter and 1” aluminium voice coil for clear sound performance. They have a rather wide frequency range of 130 Hz to 20 kHz and a sensitivity of 94 dB with an impedance of 4 ohms. The sound quality that we got from these ATV speakers is outstanding – they produce really solid midranges, crisp highs and punchy lows that adds depth and flavour to music performances. They are also easy to install onto ATV cages and have a dimension of 7” x 5” x 7” with a weight of 5.9 lbs per pair. If you are looking for waterproof ATV speakers to install on your ATV for outdoor listening, the BOSS MRWT40 comes highly recommended.
#2 Best Sound Quality: NOAM NUTV4 Waterproof ATV Speakers
The NOAM NUTV4 are a set of high performance waterproof ATV speakers designed to deliver superb sound performance. These speakers are built specially for high-quality audio output while riding in the ATV with excellent bass reproduction. It comes as a set of four 2-way 4” marine-grade speakers powered by a 4 channel amplifier with Bluetooth remote functionality. You can easily play music with the NOAM NUTV4 speakers with wireless Bluetooth streaming directly from your smartphone device or via the in-line auxiliary input. These waterproof ATV speakers come with all-round weather-resistance and are equipped for exposure to outdoor elements; the speakers, amplifier and remote are all water-resistant. The remote includes background light for use under dark conditions. These ATV speakers are relatively easy to install and can be mounted on any roll bar with a size of 1.25” to 2” thick – the mounting pads are also included. Overall, the NOAM NUTV4 are high performance waterproof ATV speakers that delivers really crisp sound performance and we highly recommend them.
The sound quality of the NOAM NUTV4 far exceeded our expectations. These ATV speakers are capable of producing really loud and powerful sound that can overwhelm the entire ATV. The sound from these speakers remains loud and clear even with the ATV engine running at full throttle, which really adds to the ATV driving experience. The highs and midranges on these ATV speakers are crisp and clear, and they produce really good quality full-range sound. You can clearly hear all the beats and instruments in the music without having to skip a beat. The amount of bass that these ATV speakers produce cuts deep and adds plenty of depth to the overall music experience, although they can definitely benefit from the addition of a dedicated subwoofer. Vocal performances sounded pristine and very accurately reproduced without any harshness or sibilance. The sound quality of all four speakers work in unison to deliver really smooth sound quality and does not distort when cranked up to maximum volume. Overall, these speakers produce some of the best sound performance we have heard from ATV speakers and really delivers clean and crisp sound.
The NOAM NUTV4 comes as a set of four 2-way 4” marine speakers powered by a 4-channel amplifier with an advanced Bluetooth remote. We liked the fact that these speakers come with all the hardware you need to get started installing these speakers on your TV – it comes with an amplifier, Bluetooth controller, 4 x 11.5” wires, mounting accessories and power wire. The head unit, amplifier and speakers are finely tuned together to provide harmonized sound quality. These ATV speakers have Bluetooth streaming functionality and you can play music directly from your mobile device; it also comes with an auxiliary input with a protective cap for non-wireless music sources. The N4 speakers come with really good quality materials including a 4” high quality poly-injection cone, butyl rubber surround, 1” PEI neodymium dome tweeter with impedance of 4 ohms and power of 100 watts. The N4 speakers will fit any round ATV cage bar with a diameter of 1.5” to 2” and can be easily adjustable.
The Verdict? The NOAM NUTV4 is one of the best waterproof ATV speakers built to deliver quality sound performance. These speakers can pump out extremely clear and loud music at high volume levels without any distortion – the music cuts through engine noise and rumble and makes them really enjoyable to listen to. The highs and midranges on these ATV speakers are crisp, clear and well-defined; vocal performances sound really good right off the bat with clear emphasis on the timbre ranges. These speakers also produce decent bass output which adds a layer of complexity and depth to the music. We really liked the fact that these speakers support Bluetooth connectivity and you can stream music directly from your smartphone to these ATV speakers. They are also covered with a durable marine-grade outer-shell construction which makes them water resistant and impervious to the outdoor elements. They are also relatively easy to install on your ATV bar and come with all the necessary equipment for easy installation together with an amplifier. Overall, the NOAM N4 waterproof ATV speakers really deliver great value and sound quality, so don’t forget to check them out!
#3 Best Value: Sound Storm BTB6 Waterproof ATV Speakers
The Sound Storm BTB6 are some of the best waterproof ATV speakers designed for ATV and UTV audio applications that delivers really good value. These speakers come with built-in Bluetooth audio streaming which allows you to stream music directly from your smartphone device including apps such as a Pandora and Spotify through the Bluetooth remote control. It also features a 3.5mm auxiliary-in compatible input for use with non-wireless mp3 devices. The speakers come with waterproof poly-injection speaker cones and high performance tweeters for crystal clear sound reproduction and have a wide frequency response between 45 Hz to 25 k Hz. The ATV speakers also come with a high-performance built-in 450 watt Class A/B amplifier for really good sound performance and volume. It is essentially a plug and play speaker and can be easily installed on ATV or UTVs. The BTB6 speakers are compatible with 12V power sources and come with a weatherproof construction which means that these speakers are well protected against moisture, rain, water splashes and other outdoor elements.
The BTB6 ATV speakers are capable of producing a tonne of volume and sound loud and clear with great emphasis on the bass. Music performances on the BTB6 ATV speaker sounded crisp, well-defined and very detailed with each individual note. Vocal performances sounded surprisingly good with nice separation and really good details – the timbre ranges are nicely reproduced on these speakers. The great thing about the sound from the BTB6 speaker is the bass – the lower-midrange tones hits hard and delivers deep punchy lows that all a lot of punch to disco and bass-heavy music genres. You can really hear the beats in the music while driving in your ATV with these speakers installed. The Bluetooth connectivity works like a charm and we did not experience any lag or dips in sound quality while streaming music via Bluetooth – the sound quality remains consistent even while driving. The BTB6 speakers can get really loud and project the sound outwards – the music cuts through ATV engine noise and allows you to listen to your music clearly without any issues. Overall, the BTB6 ATV speakers really perform well in terms of sound reproduction with plenty of bass response.
The Sound Storm BTB6 ATV speakers have a rugged and waterproof design that protects it from exposure to outdoor elements. The speaker is capable of attaching to the ATV vehicle easily and stays securely fastened without falling off. These speakers are compatible with any 12V power source and you can crank out your tunes with the 450 watt max power amplifier – this amplifier is built-in into the system which means you only need to run power through the speakers. It comes with Bluetooth audio streaming functionality which is really useful to avoid the clutter of auxiliary cables, although it does have an aux input for non-wireless music sources. The speakers are 6.5” marine-grade speakers with 1” tweeters for crisp highs and smooth audio reproduction. We liked how durable and rugged the entire ATV system looks in real life and they have great weatherproofing which makes them resistant against sunlight, water and exposure to other outdoor elements.
The Verdict? The Sound Storm BTB6 are some of the best waterproof ATV speakers we have tested that delivers really good value for money. The sound quality from the BTB6 speakers is superb, with crisp highs, nice midranges and really powerful bass. The bass hits surprisingly hard and adds plenty of punch and depth to music performances. Furthermore, the speaker is capable of producing a lot of volume output without any distortion and easily drowns out ATV engine background noises. The BTB6 comes with built-in Bluetooth functionality which easily streams music directly from your smartphone device and apps; it also has an aux input for non-wireless music sources. We liked the fact that these speakers come with a built-in amplifier of 450 watts – they only need to be connected to a 12V power source to get started. Installing these speakers is also straightforward and are easily mountable on ATV cage bars. Overall, the Sound Storm BTB6 are some of the best waterproof Bluetooth speakers we have tested and we highly recommend them.
#4 Most Durable: Boss Audio ATV6B Waterproof ATV Speakers
The Boss Audio ATV6B is one of the most durable waterproof ATV speakers that delivers crystal clear sound quality. It delivers really crisp sound performance and comes with Bluetooth audio streaming which allows you to stream music directly from your smartphone device using Spotify or Pandora. The ATV6B features a fully marine-grade weatherproof construction which protects against the outdoor elements such as rain, water and exposure to sunlight. The speaker is compatible with any 12V power source and comes with a built-in 450 watts max power amplifier with a 6.5” poly-injection cone speaker with a 1” high performance dome tweeter. The speaker has a dimension of 26” x 9.5” x 7.5” and fits in easily into ATV cages with a weight of 12.5 lbs. It also has a 3.5mm auxiliary input for connectivity with smartphones and non-wireless music sources. This ATV speaker is essentially plug and play straight out of the box and ideal for ATV or UTV installations with easy pairing. Overall, it’s one of the most durable waterproof ATV speakers available that comes highly recommended.
The sound performance of the Boss Audio ATV6B is nice, crisp and loud. The sound quality is very detailed and clear and it produces enough volume to cut through the loud engine ATV noise. The highs and midranges on the ATVB speakers are well-balanced, and the lows and deep response has plenty of depth. Vocal performances sounded crystal clear with nice details, while bass-heavy music genres such as electronic dance music and rock had plenty of depth and complexity. The bass beats from the ATVB6 speakers can be heard really well with plenty of punch – you can literally feel the entire ATV vibrating while playing music from these speakers. We also liked the fact that you can crank up the volume on the ATVB speakers and they will not produce any distortion – the sound quality remains consistent and high volume levels and does not sound shrill or distorted. The Bluetooth connectivity to the mobile device was an added plus and the music streaming quality is pretty decent without any interruptions from the ups and downs of ATV movement.
Where the Boss Audio ATV6B shines is in its durable construction. The ATV6B has a solid marine-grade weatherproof construction which protects the speakers against rain, water exposure and other outdoor elements. The speaker has UV coating on the plastic surfaces and circuitry boards to protect against heat and sunlight exposure. The ATV speakers are relatively easy to install on ATV cage bars and also come with a built-in amplifier – this means that you only need to supply a 12V power source to the speakers to get them up and running. The built-in 450 watt amplifier is capable of delivering loud volume without any distortion. The speakers have a 6.5” poly-injection cone and 1” high performance dome tweeter which delivers crisp highs and detailed vocal performance. We liked the fact that these speakers support wireless Bluetooth audio streaming directly from your smartphone device which is really convenient – it also comes with an auxiliary input for non-wireless music sources. The speakers are compatible with Pandora and Spotify and blast music while cutting through engine background noises so you can hear your soundtracks clearly.
The Verdict? The Boss Audio ATV6B is one of the best waterproof ATV speakers that deliver really powerful audio performance with a fully marine-grade construction. The speaker is designed to be weatherproof with UV resistant coating for exposure to outdoor elements. It has a dimension of 26” x 9.5” x 7.5” and weighs 12.5 lbs, making it easy to install on ATV or UTV cages. The speakers also have Bluetooth audio streaming and allow you to play music directly from Spotify or Pandora wirelessly. The ATVB comes with a 3.5mm auxiliary input for non-wireless music sources, as well as a built-in 450 watt amplifier which delivers really powerful sound output without any distortion. To power up the speaker, all you have to do is to connect it to a 12V power source. The sound quality that we got from this ATV speaker is crisp, clear and well-defined with plenty of volume output without any distortion. The wireless Bluetooth streaming works like a charm and allows you to stream music without any issues. Overall, the ATVB is a waterproof ATV speaker that delivers above expectations and we highly recommend them.
#5 Best Design: Pyle Marine 800 Watt Waterproof ATV Speakers
The Pyle Marine 800 Watt Waterproof ATV speakers are some of the most powerful speakers we have tested with really cool LED lighting features. These ATV speakers feature multi-colored LED lights that flash and change color with 19 dynamic color changing modes in red, green and blue and look really stunning. The speed and LED color brightness are adjustable with a remote control and they cycle through different modes according to the beats of the music. They come with 6.5” poly injection speaker cones and tweeters with 1” titanium dome diaphragms. The speakers have a unique tube design for maximum sound projection and are compatible with ATV and UTV vehicles. We liked the fact that these Pyle speakers have a max output of 800 watts and 400 watts RMS (200 watts x 2) and comes with a built-in 2-channel digital amplifier – this means that they can produce enough volume to literally rock your entire ATV. It also has an IP 44 marine waterproof rating which protects it against splashes of water and rain. Overall, the Pyle Marine 800 watt speakers are some of the best waterproof ATV speakers that certainly pack and punch with a very flashy LED design.
The sound performance of the Pyle Marine 800 watt ATV speakers exceeded our expectations. They are powerful enough to produce loud and clear volume which cuts through full engine throttle without any issues. The volume from these speakers gets loud enough to be heard some distance away and can also double as campfire speakers. The bass output that we got from these speakers is deep and punchy, and really adds punch to the music listening experience. Bass-heavy music genres such as electronic dance music and rock sounded very punchy right off the bat. You can also crank up the volume on the Pyle Marine speakers without any distortion which is a great thing – you can hear the music clearly even with the wind in your ears and the ATV engine running in the background. The highs and midranges are audible and present in the music, and vocal performances sound crystal clear and refined. The Pyle speakers have a wide frequency range between 45 Hz to 25 kHz and can practically reproduce the entire audio spectrum from high timbre ranges to low-bass ranges. While the sound quality from these speakers is nowhere near audiophile quality, they really make riding in the ATV a much more enjoyable experience with clear sound reproduction.
The Pyle Marine 800 watt ATV speakers have universal vehicle mounting capabilities together with Bluetooth wireless music streaming. These speakers have a weatherproof and water-resistant housing which protects it against outdoor elements such as rain and sunlight, and have a rugged heavy-duty construction design. The speakers offer full-range stereo sound reproduction with a dual 2-way audio system and built-in 2-channel digital amplifier. The unique tube design of the ATV speakers allows for maximum sound projection and easy installation in ATV or UTV cages. One unique feature that the Pyle Marine speaker has is the color-changing LED lightning which cycles through 19 dynamic color modes and is also speed and color brightness adjustable – this provides a disco-like listening experience with LED lights dancing to the beat of the music. We also liked the fact that these speakers come with wireless Bluetooth music streaming with Bluetooth 4.0 which allows you to stream music directly from your smartphone device.
The Verdict? The Pyle Marine 800 watt ATV speakers are some of the best waterproof ATV speakers we have tested with a really unique design and powerful sound capacity. It comes with two 6.5” speakers with 1” titanium dome diaphragms that can produce 200 watts RMS power each (400 watts per pair) with a maximum output of 800 watts – they produce full-range stereo sound quality that sounds really good. We liked the fact that you can really crank up the volume on the Pyle ATV speakers and not hear any distortion which is really nice. The bass output on these speakers hits hard and sounds very punchy, and definitely makes riding on the ATV a much more enjoyable experience. The Pyle speakers come with a heavy-duty marine grade weather-resistant housing which provides water-resistance against outdoor elements such as rain or splashes of water. They are relatively easy to install and can be powered through a simple “plug and play” connection with tine included cigarette lighter power outlet accessory cable. It also features wireless Bluetooth connectivity which makes streaming music very convenient. Overall, the Pyle Marine 800 watt speaker is one of the best waterproof ATV speakers available and we highly recommend them.
#6 Heavy-Duty Speaker: Pyle PLATV550BT Waterproof ATV Speaker
The Pyle PLATV550BT speakers are a set of waterproof ATV speakers that deliver really crisp sound performance with a solid and rugged construction. They are essentially heavy-duty speakers that you can install on your ATV and take them out into rugged terrain or expose them to outdoor elements without any issues. The Pyle PLATV550BT is a dual 6.5” 2-way speaker that delivers plenty of volume output and features marine grade housing with Bluetooth wireless music streaming. The speaker comes with a built-in 2 channel internal mounted amplifier which means that you only need to supply power to the speaker to get it started. It also features a universal heavy duty mounting system for easy installation on ATV or UTV cage bars. The speakers each have an RMS power of 125 watts (250 watts per pair) and 500 watts max power (250 watts x 2). The quality of this speaker unit shows in its durable construction and you can tell that the manufacturers put in a lot of effort to ensure that the speaker is damage resistant. Overall, the Pyle PLATV550BT is one of the best waterproof ATV speakers and is definitely worth checking out.
The sound quality of the Pyle PLATV550BT is pretty good and delivers enough volume to cut through engine rumbling noise. The speaker can produce 250 watts RMS of power with a peak power rating of 500 watts which is more than enough to rock the entire ATV. The volume on the Pyle ATV speakers gets really loud and the sound quality remains consistent and crystal clear – it does not distort at high volume levels which is great. The Bluetooth connection to the Pyle speakers is solid and good and we did not experience any dips in sound quality while driving through rough terrain. The sound also does not cut off when moving through bumpy areas – it also responds well to tweaks on the equalizer settings for much deeper mids or lows. The bass response from the speaker is nice and punchy without sounding too overwhelming; the bass does not feel bloated or muddy into the midrange frequencies which is good. Music genres such as electronic dance music and rock and hip-hop sound really punchy with these speakers and while the bass is not the hardest hitting we have heard, it does add a layer of complexity and depth to the music performance. In terms of sound quality, it’s hard to go wrong with the Pyle PLATV550BT.
The Pyle PLATV550BT features marine grade splash proof construction which protects the speakers against rain and water. The speakers are very durable and can put up against outdoor elements easily without any degradation in sound quality or performance; the Bluetooth streaming remains consistent even while moving through bumpy rough terrain on the ATV. The unit is covered by an ultra-durable plastic material which is scratch and damage resistant. We liked the fact that the speakers come with an external touch control unit which provides you with the ability to play, pause, scan through soundtracks and change the volume on the go. The touch button controls also allows you to control the connected Bluetooth devices. It also comes with a 3.5mm auxiliary input for you to connect non-wireless music sources. The Pyle speakers come with a built-in 2 channel internal mounted amplifier for extra power and you can push these speakers up to maximum volume without any distortion. This ATV speaker system is designed to work with your vehicle’s cigarette lighter but can also be hard-wired to create a custom audio system.
The Verdict? The Pyle PLATV550BT are fuss-free waterproof ATV speakers that delivers really crisp sound quality and heavy-duty construction. They come as essentially dual 6.5” 2-way stereo marine grade speakers with built-in 2 channel internal mounted amplifiers with 250 watts RMS of power (500 watts peak). They come with a waterproof housing and Bluetooth console with in-line volume controls for easy adjustment. Apart from the Bluetooth connectivity, it also features a 3.5mm stereo audio input jack for non-wireless music sources. The entire speaker is made from durable scratch-resistant plastic material that protects it against outdoor elements. The sound performance of these speakers is relatively good, with plenty of volume output and decent bass performance. They can produce enough volume to literally make your entire ATV rock with crystal clear sound performance. If you are looking for waterproof ATV speakers to install on your ATV with a heavy-duty construction and the flexibility of Bluetooth connectivity, the Pyle PLATV550BT is a great choice.
#7 Best 8” Speaker: Bazooka 8” Waterproof ATV Speaker
The Bazooka ATV speakers are waterproof ATV speakers designed for high performance sound reproduction with 450 watts peak power. These are essentially marine-grade coaxial speakers designed with a front firing tweeter with 12db per octave crossover for ideal sound reproduction. It features an open grille design for minimizing any dust or mud build-up on the speaker and allows for easy cleaning. The Bazooka speaker has a maximum 450 watts of peak power with easy integrated Bluetooth and auto-reconnect functionality – it also allows for hands-free phone calls when you pair the speakers with your Bluetooth enabled smartphone. The Bazooka also comes with waterproof 3.5mm auxiliary inputs for connection to non-wireless music sources. We also liked the unique RGB LED illumination feature on the speaker which can flash multiple colors at any speed according to your individual preferences which really adds some fun to your ATV ride. If you are looking for 8” waterproof ATV speakers that provide good sound and flashy LEDs, the Bazooka 8” speaker comes highly recommended.
The sound quality from the Bazooka 8” speaker is really good and delivers crisp volume levels without any hint of distortion. The 8” speaker is much louder and hooks up easily to the ATV bar with a really bright LED display. The Bazooka ATV-Tube can pump out a maximum 450 watts of power and project the sound outwards with its front firing tweeters. Vocal performances sounded really lifelike and well-defined on the Bazooka speakers with decent stereo separation – you can distinguish the notes coming from the left and right speaker channels. Classical and instrumental music sounded sharp and crisp with nice timbre ranges; bass-heavy music genres performed equally well with nice lows and midrange depth. We did not hear any harshness or shrill noises from the Bazooka speaker while streaming music from our Bluetooth smartphone and the connection remains consistent even through rough terrain. We cranked the volume level up to maximum and these speakers have enough volume to drown out ATV engine noise while maintaining consistent music quality.
The Bazooka ATV tube speakers have a marine-grade construction that is designed to withstand harsh outdoor elements and exposure to water. It comes with a fully customizable wireless remote control with an integrated RGB LED illumination system and comes with durable nylon straps. Installation-wise, these speakers are relatively compact and can easily fit on your ATV cage bar; the speakers also come with marine-grade SAE accessory connectors and light switches. These coaxial speakers also have a 12db per octave crossover and an open grill design to prevent accumulation of dust and dirt. The Bazooka comes with a quick disconnect power cord that attaches easily to any power rail accessory bar in your ATV and works nicely straight out of the box. We also liked the fact that the Bazooka speakers come with RGB LED illumination that can flash multiple colors to the beat of the music which makes riding on the ATV a much more enjoyable and interesting experience.
The Verdict? We really enjoyed the sound performance of the Bazooka 8 inch waterproof ATV speakers. These speakers can pump out some serious volume with a full capacity of 450 watts of max power. It features an all-weather marine-grade speaker construction with front firing tweeters that help to project the sound further into the distance. It also includes full Bluetooth functionality which allows you to stream music wirelessly and take hands-free calls. It also comes with a unique LED illumination system which makes the speakers look really sleek and eye-catchy. The sound quality on the 8” speakers is crisp, clear and well-defined with deep bass response. The level of stereo clarity that we heard from these speakers is impressive and they have enough volume to drown out ATV engine noise. Furthermore, the wireless Bluetooth streaming is consistent and does not break off while riding the ATV on rocky terrain. Overall, the Bazooka 8” waterproof Bluetooth speakers are really solid and rugged speakers that deliver great sound in outdoor open spaces and easy to install on ATV vehicles.
#8 Most Compact: Boss Audio MC750B Waterproof ATV Speaker
The Boss Audio MC750B are high-powered waterproof ATV speakers that deliver great sound quality in a compact package. The entire package comes as a pair of 3” full-range speakers with a 600 watt max power amplifier and works great with a 12V power source. The Boss MC750B comes with Bluetooth audio streaming which allows you to play music directly from apps including Spotify and Pandora wirelessly. The speakers are powered by a high-performance 2-channel class A/B amplifier and include 3.5mm auxiliary input compatibility with audio output that supports smartphones and non-wireless mp3 players. The MC440B also features a weatherproof construction that provides resistance against rain, sunlight and outdoor elements and are relatively easy to install on ATV vehicles. The entire package includes two 4” black ATV speakers, one 2-channel amplifier, one inline volume control and adjustable brackets with handlebars from 0.75” to 1.25”. Overall, the Boss Audio MC750B are waterproof ATV speakers that delivers really crisp sound quality in a compact setup and we highly recommend them.
The sound performance of the Boss Audio MC750B surpassed our expectations for a pair of bar mounted speakers. They easily rival built-in ATV speaker systems and produce really clear and audible sound even at high speed levels. The sound performance that we got from these speakers is loud and well-defined and has decent bass output, although the bass response can be enhanced with the addition of a dedicated subwoofer. The small and compact size of these speakers makes them easy to install and mount on ATV bars without any issues. The MC750B speakers are capable of producing plenty of volume and have a max peak power output of 600 watts which is more than enough to rock your entire ATV vehicle – the sound quality remains crystal clear throughout and does not distort at high volume levels. The sound easily cuts through engine noise and remains audible while speeding on a highway or in rough terrain without any issues. Vocal performances sounded very crisp with decent stereo separation and clean details. You really do get full-range sound quality output with the Boss Audio MC750B ATV speakers.
The Boss Audio MC750Bs have a small and compact size which makes them easy to mount and stabilize on the ATV or motorcycle. They can be powered by hooking it up to a 12V power source on your motorcycle or ATV – it comes with a 600 watt max power amplifier that connects seamlessly to the 3” full-range speakers. The MC750Bs support wireless Bluetooth music streaming which allows you to play music directly from your music apps including Spotify and Pandora – you can also turn up the sound with the wired remote volume control that comes with these speakers. It also supports 3.5mm auxiliary input for non-wireless music sources where required. The Boss Audio MC750Bs come with a really durable full marine-grade weatherproof construction that provides resistance against water exposure and sunlight. They have a really sleek and polished appearance and mounts nicely on the ATV without taking up too much space. We liked the fact that the manufacturers also provide adjustable bracket fit handlers for easy installation on the ATV bar.
The Verdict? The Boss Audio MC750Bs are some of the best waterproof ATV speakers we have tested that delivers really crisp sound performance in a compact setup. They are fully marine-grade speakers with a weatherproof exterior construction that provides resistance against water and sunlight. We also liked the fact that these speakers support wireless Bluetooth connection which allows you to stream music directly from Spotify or Pandora – you can also adjust the volume via the Bluetooth remote control. The speakers are powered by a high-performance Class A/B amplifier with a maximum power output of 600 watts – they can be easily powered by 12 V applications. The sound quality that we got from these speakers is crisp, clear and very well-defined with plenty of volume output – the volume is high enough to drown out ATV engine background noise. We also liked the fact that these ATV speakers came with adjustable brackets for easy installation on ATV cage bars. Overall, they are pretty solid waterproof ATV speakers that you should definitely check out if you are looking for a more compact setup.
#9 Most Powerful: Pyle PLMCA90 1200 Watt Waterproof ATV Speakers
The Pyle PLMCA90 are among the most powerful waterproof ATV speakers that excel in delivering superb sound quality and performance with a peak power of 1200 watts. It comes as a set of dual handle-bar mount weatherproof speakers with 300 watts X 4 channel micro amplifier (max 1200-watt) with wire harness. The 3” style bullet-style speakers come with chrome stainless universal handlebar audio mounts and a compact amplifier with a dimension of 3.05” x 1.19” x 5.71”. This ATV speaker system also includes a 3.5mm stereo input jack for easy connectivity to other non-wireless music sources such as iPods or mp3 players. The speakers are shaped with quad chrome aluminium bullet style 3” speakers with a neodymium magnet structure and USB charger. The entire setup comes with two pairs of chrome clamps with stainless mounting brackets and accessories included for easy installation. Overall, the Pyle PLMCA90s are waterproof ATV speakers that deliver punchy sound performance and are great value for money.
The 2.5” speakers on the Pyle PLMCA90 can pump out 300 watts of power at 4 ohms impedance with a frequency response of 250 Hz to 20 kHz. The speakers deliver full range sound quality with a 1200 watt peak power which delivers enough volume to drown out engine background noise. When we tested the Pyle PLMCA90s we were really impressed by how loud and clear these speakers are – the sound quality is really good and easily cuts through noises on a windy day or while riding on the highway. You can really crank up the volume on these speakers and they will produce enough volume to drown out engine background noises; we did not hear any distortion while playing music at maximum volume which is really good. We also liked the fact that these speakers are pretty responsive to EQ changes – you can tweak the bass and timbre ranges and they will sound quite good on the Pyle speakers. Vocal performances are reproduced with a level of clarity and detail that we did not expect – you can hear almost every detail in the music with clarity and the bass is present but not overpowering. You can expect no muddiness or distortion on the Pyle PLMCA90 speakers and they really do deliver quality sound performance with plenty of attention to detail.
The Pyle PLMCA90 speakers are built like tanks and the USB and volume controls are encased in heavy-duty metal frames. The 3” bullet-style speakers look really sleek and feature a full weatherproof design that protects it against rain and exposure to water or sunlight. It also includes a 3.5mm auxiliary input for you to plug your mp3 player or iPod into the speakers. The Pyle speakers come with easy handlebar mounting brackets and accessories for quick installation, which is an ice added touch. We liked the fact that these speakers come with a 4 channel micro amplifier which provides up to 1200 watt peak power – it delivers plenty of power to push these speakers and does not distort. The Pyle speakers are relatively easy to install and mount and it also comes with mounting hardware including clamps, bolts, plates and brackets together with a 5 volt USB charger and handlebar mount rotary volume control. The ATV speakers are relatively compact and has a dimension of 2.5” x 2.5” x 3” which makes them easy to mount on ATV cages and handlebars.
The Verdict? We really liked the sound performance and overall quality of the Pyle PLMCA90 waterproof ATV speakers. It comes as set of four 3” bullet-style 50 watt weatherproof speakers and a 1200 watt amplifier for high-powered sound performance. You can also plug your mp3 player or iPod with the included 3.5mm jack to listen to your favorite music soundtracks. It also allows you to charge your mp3 player with the USB plug and comes with easy handlebar mounting brackets and accessories to make installation a quick and seamless process. The 2.5” speakers can pump out 300 watts peak power at 4 ohm impedance with a wide frequency response of 250 Hz to 20 kHz. When we tested these speakers, we really liked how loud the speakers can go while drowning out engine background noises from the ATV – the sound projection is really good and you can pick up details in the music which sound crisp and well-defined. Vocal performances sound especially good with these speakers and are reproduced with nice stereo separation. These waterproof ATV speakers also feature a fully marine-grade weatherproof construction, making them impervious to rain, sunlight and the outdoor elements. If you want great sound for your ATV vehicle and need extra power and volume, we highly recommend the Pyle PLMA90 ATV speakers.
#10 Best for Custom-Installations: Polk Audio MM1 5.25” Waterproof ATV Speakers
The Polk Audio MM1 are a set of waterproof ATV speakers that delivery really good sound performance for custom ATV installations. It comes as a pair of 5.25” 600 watt ATV speakers with a 5.25” driver and 1” tweeter complement that is designed to produce crystal clear audio performance. These speakers have a peak power handling of 300 watts per speaker and a continuous RMS power of 100 watts per speaker at 4 ohms. They have a cut-out dimension of 4.61” and a mounting depth of 2.37” for easy installation. The speakers have a wide frequency response of 50 Hz to 40 kHz and a sensitivity of 92 dB. They are marine-grade which makes them impervious to water and exposure to outdoor elements and features neodymium magnets for best sound reproduction. They also come with a non-corrosive fiberglass reinforced ABS basket and waterproof inner and outer surrounds. Overall, these 5.25” coaxial speakers are some of the best waterproof ATV speakers we have tested that delivers clear and crisp sound quality and we highly recommend them.
In terms of sound performance, we can safely say that the Polk Audio MM1 5.25” coaxial speakers does meet our expectations. For a set of 5.25” speakers, they deliver really crisp and crystal clear sound performance with a decent amount of volume – more than what you can expect from these speakers. The timbre and treble ranges are very nicely reproduced and sound sharp and detailed, while the midranges are present and smooth. The bass response on these speakers is impactful and not overwhelming; while we would have liked more bass, you would probably need to install a dedicated subwoofer for deeper bass response. We liked the fact that you can really crank up the volume on these speakers without hearing any distortion which is great – the sound projection is very good and blasts out music without dispersing too quickly. The sound cuts through ATV engine rumbling noise and has depth and impact which makes it feel really nice to listen to. If you are looking for ATV speakers with crystal clear vocal sound quality and crisp highs, the Polk Audio MM1 comes highly recommended.
The Polk Audio MM1 speakers have a really sleek and modern looking design that blends in nicely within the ATV or UTV custom-installations. These speakers feature dynamic balance technology and come with a pivoting 1” terylene tweeter, neodymium motor structure and conex spiders with oversized voice coils for increased power handling. The speakers are marine-grade certified and feature an IP56 rating that comes with a non-corrosive fiberglass reinforced ABS basket with epoxy coated crossovers. The inner and outer surrounds are waterproofed with weep holes for drainage and titanium plated cones, which makes these speakers resistant to water, sunlight and exposure to outdoor elements. These speakers can deliver quite a lot of volume with a peak power of 300 watts per speaker and an RMS power of 100 watts at 4 ohms. The driver is 5.25” wide and the tweeter complement is 1” long. The entire package comes with two 5.25” coaxial speakers, 2 grilles, mounting hardware and wiring harness for easy installation.
The Verdict? The Polk Audio MM1 are some of the best waterproof ATV speakers for custom-built ATV audio installations. They come as a pair of 5.25” 600 watt coaxial speakers with a 5.25” driver and 1” tweeter complement. It has a cutout dimension of 4.61” with a mounting height of 0.20” and a mounting depth of 2.37”. The sound quality that we got from these speakers was impressive, with very nice treble and timbre ranges, crisp vocals and present midranges that sound immersive. They have 100 watts RMS of power which is good enough to blast music through engine noises and while driving along the highway. The speakers are full-range and have a frequency response of 50 Hz to 40 kHz which is really wide; they also have a sensitivity of 92 dB. Where these ATV speakers shine is in its construction – they come with waterproof grade construction with a fiberglass reinforced ABS basket which protects the drivers against outdoor element. These waterproof ATV speakers look like they can last for a long time and certainly deliver very pristine highs and clear midranges with decent bass output.